by daryl | Sep 29, 2015 | Techincal
Clarity and low latency = high customer acceptance. It is critically important to use a high performance dual mode WAP that is capable of delivering a stream of data with low jitter 24/7 to deliver an acceptable service. Many routers will work sufficiently for short...
by daryl | Jul 23, 2015 | Techincal
To overcome increasing congestion in the 2.4Ghz range we recommend only waireless access points that have both 2.4Ghz and 5Ghz radios and promoting use of the 5Ghz radio instead of 2.4Ghz. Most modern mobiles support 5Ghz and it is designed for higher performance...
by daryl | Jul 13, 2015 | Techincal
Don’t DIY your Wireless Access Point and expose your private network to people unless you really know what you are doing. Adding a public wireless hot-spot can expose private information on your internal network if not done correctly. Never just plug a WAP into...
by daryl | Jul 13, 2015 | Techincal
The old adage that you cant get something for nothing is at work here. Selecting ‘Quality’ mode implies the system will send more data to each device which will reach Wifi throughput limits with less users. Using this mode also halves the total number of...
by daryl | Jul 13, 2015 | Techincal
Wifi introduces significant latency into the system but of course it is required to send the audio to the listener’s device. Using Wifi to connect the Terminator to the network will expose the signal to an additional leg of Wifi, doubling the latency that Wifi...
by daryl | Jul 13, 2015 | Techincal
All audio data from the Flexicast Wifi Audio system stays on the local LAN only and does not contribute to internet use. The Flexicast Wifi Audio server units connect to external Flexicast servers for operating system maintenance, support logging and to interface with...
